Product Recall: Mares Nemo Air Quick Connector

Mares this month issued a safety recall of their Nemo Air Quick Connector, due to a quality issue on the O-ring used in the assembly of the connector.

Under certain circumstances the O-ring can fail and consequently Nemo Air may start leaking through the Quick Connector. As a result, there is a continuous, albeit slow, loss of breathing gas. This situation could potentially lead to an accident, hence Mares has decided to issue a product recall. The solution already exists in the form of an O-ring of different material and hardness which can be retrofitted onto the Quick
Connector of your current Nemo Air.

Please note that the event of an uncontrolled loss of breathing gas from the high pressure hose is regulated by the EN250 Norm, which requires a 0.3mm opening in the high pressure fitting. As a result, the loss of breathing gas is very slow and a diver should always be able to complete a dive safely, NONETHELESS FOR YOUR PERSONAL SAFETY AND TO AVOID POSSIBLE DANGEROUS ACCIDENTS:

STOP DIVING WITH A QUICK CONNECTOR SUBJECT TO THIS RECALL UNTIL THE EXISTING O-RING IS REMOVED AND SUBSTITUTED WITH THE NEW ONE.

Affected products and codes are:
1. Finished goods
414158 – DIVE COMPUTER NEMO AIR
414159 - DIVE COMPUTER NEMO AIR W/COMPASS NO

2. Spare parts
44200771 – HP HOSE W/QUICK CONNECTOR NEMO AIR
44200770 – QUICK CONNECTOR ASSY. FEMALE NEMO AIR

PLEASE CONTACT THE NEAREST AUTHORIZED MARES SERVICE CENTER TO SCHEDULE THE REPLACEMENT OF THE O-RING IN YOUR QUICK CONNECTOR.

NEMO AIR QUICK CONNECTOR O-RING MUST BE REMOVED AND SUBSTITUTED WITH THE NEW
ONE.

Here is a copy of the original Mares recall notice.